Rat TAU / MAPt ELISA Kit
- SKU:
- RTFI00944
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P19332
- Sensitivity:
- 18.75pg/ml
- Range:
- 31.25-2000pg/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- MAP?
- Reactivity:
- Rat
Description
| Product Name: | Rat MAP? (Microtubule Associated Protein Tau) ELISA Kit |
| Product Code: | RTFI00944 |
| Size: | 96 Assays |
| Target: | Rat MAP? |
| Alias: | MAP? |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 18.75pg/ml |
| Range: | 31.25-2000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat MAP? and the recovery rates were calculated by comparing the measured value to the expected amount of Rat MAP? in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat MAP? and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P19332 |
| UniProt Protein Function: | Tau: a microtubule-associated protein that regulates microtubule assembly and stability. Apparently involved in the establishment and maintenance of neuronal polarity. Mutations can result in several neurodegenerative disorders such as Alzheimer's disease, Pick's disease, frontotemporal dementia, cortico-basal degeneration and progressive supranuclear palsy. The C-terminus binds axonal microtubules while the N-terminus binds neural plasma membrane components, suggesting that tau functions as a linker. Axonal polarity is predetermined by tau localization (in the neuronal cell) in the domain of the cell body defined by the centrosome. Nine differentially spliced isoforms have been described. The short isoforms allow plasticity of the cytoskeleton, whereas the longer isoforms may preferentially play a role in its stabilization. |
| UniProt Protein Details: | Protein type:Cytoskeletal Chromosomal Location of Human Ortholog: 10q32.1 Cellular Component: axolemma; axon; axoneme; cell soma; cytoplasm; cytosol; dendrite; growth cone; internal side of plasma membrane; membrane; microtubule; microtubule associated complex; microtubule cytoskeleton; neuron projection; nuclear speck; nucleus; plasma membrane; postsynaptic density; tubulin complex Molecular Function:apolipoprotein binding; DNA binding; enzyme binding; Hsp90 protein binding; identical protein binding; microtubule binding; protein binding; protein complex binding; protein domain specific binding; protein homodimerization activity; protein kinase binding; protein phosphatase 2A binding; receptor agonist activity; SH3 domain binding Biological Process: adult walking behavior; apoptosis; axon cargo transport; axon extension; axonogenesis; brain development; female pregnancy; induction of apoptosis by oxidative stress; intracellular distribution of mitochondria; memory; microtubule cytoskeleton organization and biogenesis; mitochondrion transport along microtubule; negative regulation of intracellular transport; negative regulation of kinase activity; neurite development; neuron migration; positive regulation of axon extension; positive regulation of microtubule polymerization; positive regulation of superoxide release; regulation of autophagy; regulation of calcium-mediated signaling; regulation of microtubule polymerization or depolymerization; response to nutrient; response to organic substance; synapse organization and biogenesis |
| NCBI Summary: | a microtubule-associated protein; expression is found specifically in neurons [RGD, Feb 2006] |
| UniProt Code: | P19332 |
| NCBI GenInfo Identifier: | 13432197 |
| NCBI Gene ID: | 29477 |
| NCBI Accession: | P19332.3 |
| UniProt Secondary Accession: | P19332,Q63567, Q63677, Q9QW06, |
| UniProt Related Accession: | P19332 |
| Molecular Weight: | 80.4kD |
| NCBI Full Name: | Microtubule-associated protein tau |
| NCBI Synonym Full Names: | microtubule-associated protein tau |
| NCBI Official Symbol: | Mapt |
| NCBI Official Synonym Symbols: | Tau; pTau; Mtapt; RNPTAU |
| NCBI Protein Information: | microtubule-associated protein tau |
| UniProt Protein Name: | Microtubule-associated protein tau |
| UniProt Synonym Protein Names: | Neurofibrillary tangle protein; Paired helical filament-tau; PHF-tau |
| Protein Family: | Microtubule-associated protein |
| UniProt Gene Name: | Mapt |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 — g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Rat Microtubule-associated protein tau (Mapt) ELISA Kit
Human Microtubule-associated protein tau (MAPT) ELISA Kit
Human MAPT / Microtubule-associated protein tau ELISA Kit
Bovine Microtubule-associated protein tau (MAPT) ELISA Kit
Mouse Microtubule-associated protein tau (Mapt) ELISA Kit
Rat Phospho-TAU / pTAU ELISA Kit
Human Tau PK1 (Tau-Protein Kinase) ELISA Kit (HUFI08044)
