Mouse Thrombin-antithrombin complex / TAT ELISA Kit

(No reviews yet) Write a Review
SKU:
MOFI01136
Product Type:
ELISA Kit
Size:
96 Assays
Sensitivity:
75pg/ml
Range:
125-8000pg/ml
ELISA Type:
Sandwich ELISA, Double Antibody
Synonyms:
TAT
Reactivity:
Mouse
Frequently bought together:

Description

system_update_alt데이터시트system_update_alt안전 데이터시트
Product Name:Mouse Thrombin-antithrombin complex / TAT ELISA Kit
Product Code:MOFI01136
Size:96 Assays
Alias:TAT
Detection Method:Sandwich ELISA
Application:This immunoassay kit allows for the in vitro quantitative determination of Mouse TAT concentrations in serum plasma and other biological fluids.
Sensitivity:75pg/ml
Range:125-8000pg/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Mouse TAT and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse TAT in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)91-10297
EDTA plasma(n=5)85-10594
UFH plasma(n=5)88-10293
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse TAT and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-100%94-103%85-105%
EDTA plasma(n=5)88-100%85-98%87-99%
UFH plasma(n=5)88-100%85-95%89-99%
Intra Assay:CV <8%
Inter Assay:CV <10%
ComponentQuantityStorage
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

Other materials and equipment required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotQ8QZR1
UniProt Protein Function:TAT: Transaminase involved in tyrosine breakdown. Converts tyrosine to p-hydroxyphenylpyruvate. Can catalyze the reverse reaction, using glutamic acid, with 2-oxoglutarate as cosubstrate (in vitro). Has much lower affinity and transaminase activity towards phenylalanine. Defects in TAT are the cause of tyrosinemia type 2 (TYRO2); also known as Richner-Hanhart syndrome. TYRO2 is an inborn error of metabolism characterized by elevations of tyrosine in the blood and urine, and oculocutaneous manifestations. Typical features include palmoplantar keratosis, painful corneal ulcers, and mental retardation. Belongs to the class-I pyridoxal-phosphate-dependent aminotransferase family.
UniProt Protein Details:

Protein type:Transferase; EC 2.6.1.5; Mitochondrial; Amino Acid Metabolism - phenylalanine, tyrosine and tryptophan biosynthesis; Amino Acid Metabolism - phenylalanine; Amino Acid Metabolism - cysteine and methionine; Cofactor and Vitamin Metabolism - ubiquinone and other terpenoid-quinone biosynthesis; Amino Acid Metabolism - tyrosine

Cellular Component: mitochondrion

Molecular Function:transferase activity; amino acid binding; tyrosine transaminase activity; transaminase activity; catalytic activity; pyridoxal phosphate binding

Biological Process: response to mercury ion; amino acid metabolic process; glutamate metabolic process; L-phenylalanine catabolic process; tyrosine catabolic process; aromatic amino acid family metabolic process; response to glucocorticoid stimulus; biosynthetic process; aromatic amino acid family catabolic process; response to oxidative stress; response to organic cyclic substance; 2-oxoglutarate metabolic process

NCBI Summary:This gene encodes a liver-specific mitochondrial enzyme that catalyzes the conversion of L-tyrosine into p-hydroxyphenylpyruvate. Regulated by glucocorticoid and polypeptide hormones, this gene's expression is affected by deletion of a regulatory region near the albino locus on chromosome 7. Mutations in this gene cause tyrosinemia type II in humans. [provided by RefSeq, Mar 2010]
UniProt Code:Q8QZR1
NCBI GenInfo Identifier:22122769
NCBI Gene ID:234724
NCBI Accession:NP_666326.1
UniProt Related Accession:Q8QZR1
Molecular Weight:Predicted MW: 33.7kDaAccurate MW: 34kDa
NCBI Full Name:tyrosine aminotransferase
NCBI Synonym Full Names:tyrosine aminotransferase
NCBI Official Symbol:Tat  
NCBI Protein Information:tyrosine aminotransferase
UniProt Protein Name:Tyrosine aminotransferase
UniProt Synonym Protein Names:L-tyrosine:2-oxoglutarate aminotransferase
Protein Family:Tyrosine aminotransferase
UniProt Gene Name:Tat  
UniProt Entry Name:ATTY_MOUSE

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample TypeProtocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

Tissue homogenates:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Breast Milk:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

0 Reviews

View AllClose

Related Products