인간 GCLC ELISA (HUEB1485)

Human Glutamate--cysteine ligase catalytic subunit (GCLC) ELISA Kit

(No reviews yet) Write a Review

SKU:

HUEB1485

Product Type:

ELISA Kit

Size:

96 Assays

Uniprot:

P48506

Range:

0.156-10 ng/ml

ELISA Type:

Sandwich

Synonyms:

GCLC, Glutamate--cysteine ligase catalytic subunit, Gamma-glutamylcysteine synthetase, GCS heavy chain, Gamma-ECS, GCS, GLCL, GLCLC

Reactivity:

Human

Description
0 Reviews

Description

데이터시안전 데이터시트

UniProt Protein Function:	GCLC: Defects in GCLC are the cause of hemolytic anemia (HAGGSD). Belongs to the glutamate--cysteine ligase type 3 family.
UniProt Protein Details:	Protein type:Ligase; Other Amino Acids Metabolism - glutathione; EC 6.3.2.2 Chromosomal Location of Human Ortholog: 6p12 Cellular Component: glutamate-cysteine ligase complex; cytosol Molecular Function:glutamate binding; protein heterodimerization activity; glutamate-cysteine ligase activity; magnesium ion binding; coenzyme binding; ADP binding; ATP binding Biological Process: glutamate metabolic process; response to arsenic; L-ascorbic acid metabolic process; response to hormone stimulus; response to nitrosative stress; cysteine metabolic process; apoptotic mitochondrial changes; sulfur amino acid metabolic process; response to heat; cell redox homeostasis; xenobiotic metabolic process; positive regulation of proteasomal ubiquitin-dependent protein catabolic process; glutathione biosynthetic process; negative regulation of protein ubiquitination; negative regulation of neuron apoptosis; response to oxidative stress; negative regulation of transcription, DNA-dependent; regulation of blood vessel size; regulation of mitochondrial depolarization; negative regulation of apoptosis Disease: Gamma-glutamylcysteine Synthetase Deficiency, Hemolytic Anemia Due To; Myocardial Infarction, Susceptibility To
NCBI Summary:	Glutamate-cysteine ligase, also known as gamma-glutamylcysteine synthetase is the first rate-limiting enzyme of glutathione synthesis. The enzyme consists of two subunits, a heavy catalytic subunit and a light regulatory subunit. This locus encodes the catalytic subunit, while the regulatory subunit is derived from a different gene located on chromosome 1p22-p21. Mutations at this locus have been associated with hemolytic anemia due to deficiency of gamma-glutamylcysteine synthetase and susceptibility to myocardial infarction.[provided by RefSeq, Oct 2010]
UniProt Code:	P48506
NCBI GenInfo Identifier:	1346190
NCBI Gene ID:	2729
NCBI Accession:	P48506.2
UniProt Secondary Accession:	P48506,Q14399,
UniProt Related Accession:	P48506
Molecular Weight:	72,766 Da
NCBI Full Name:	Glutamate--cysteine ligase catalytic subunit
NCBI Synonym Full Names:	glutamate-cysteine ligase, catalytic subunit
NCBI Official Symbol:	GCLC
NCBI Official Synonym Symbols:	GCL; GCS; GLCL; GLCLC
NCBI Protein Information:	glutamate--cysteine ligase catalytic subunit; gamma-ECS; GCS heavy chain; gamma-glutamylcysteine synthetase
UniProt Protein Name:	Glutamate--cysteine ligase catalytic subunit
UniProt Synonym Protein Names:	GCS heavy chain; Gamma-ECS; Gamma-glutamylcysteine synthetase
Protein Family:	Glutamate--cysteine ligase
UniProt Gene Name:	GCLC
UniProt Entry Name:	GSH1_HUMAN

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.